Charger Compatibility
What’s it For?
Charger compatibility lets you run every charger in your depots from one platform, whatever the brand. Tenix Charge connects to chargers over OCPP, the open protocol used by depot chargers, and works with buses from any vehicle manufacturer. Tenix works with any charger, so you can choose hardware on price, power and service, and add new brands as the fleet grows.
Why Brand Independence Matters
Most depots end up with more than one charger brand. A new tender, a second depot or an expansion brings new hardware, and each manufacturer offers its own software with its own portal, data and limits. Teams switch between systems to see what is happening, load management stops at the edge of each brand, and the charger supplier ends up deciding which software you can use.
What Charger Compatibility Provides
Every charger and vehicle appears in one view, with the same status, alarms, controls and reports across brands. Smart charging, load balancing and power limits apply to the whole depot, so chargers from different manufacturers share one power cap and one charging plan. New chargers join the same plan when they are installed, whatever the brand, and your choice of hardware stays open at every tender.
How Charger Compatibility Works
Each charger is configured to connect to Tenix Charge and exchanges OCPP messages with the platform. Tenix supports OCPP 1.5, 1.6 and 2.x, so existing chargers keep working and no new hardware is needed. Tenix Charge reads status, power and session data from each charger and sends commands back to start, stop and limit charging. Vehicle state of charge is tracked across bus models, and preconditioning runs through the charger using VDV 261.

Key Capabilities
Charger compatibility brings every charger and bus into one plan, whatever the brand.
Any charger brand
Connect chargers from any manufacturer over OCPP, the open charging protocol.
Mixed-brand load management
Keep chargers from different brands inside one power cap and one charging plan.
One view across brands
See status, alarms, sessions and faults for every charger in the same format.
Any vehicle brand
Track state of charge and readiness across bus models and manufacturers.
Frequently Asked Questions
Got a different question? Just contact us and ask.
Which chargers does Tenix work with?
Tenix works with any charger that supports OCPP, the open protocol used by depot chargers, including OCPP 1.5, 1.6 and 2.x. Depots run chargers from different manufacturers side by side in one charging plan.
Can we keep our existing chargers?
Yes. Existing chargers are connected to Tenix Charge over OCPP and keep working, so a depot can move to managed charging without new hardware.
Can we mix charger brands in one depot?
Yes. Chargers from different manufacturers share the depot’s power cap and charging plan, and you manage them all from the same view, across every depot.
Does it work with any bus brand?
Yes. Tenix Charge works across vehicle manufacturers and bus models, and tracks state of charge and battery health for each one.
Explore
Resources for Improving Charge Operations
READY TO GET STARTED?
Join hundreds of satisfied operators using Tenix
To start the conversation, contact us.
Book a demo